|
Item |
Description |
|
Fixed port |
24 10/100Base-TX Ethernet ports, 2 dual-purpose 10/100/1000 or SFP |
|
Forwarding performance |
6.6 Mpps |
|
MAC address table |
Supports 8K MAC address entries. |
|
Supports manual deletion of dynamic MAC address entries |
|
Supports configuration of MAC address aging time. |
|
Supports disabling of MAC address learning based on port or aggregation group. |
|
Supports blackhole MAC addresses. |
|
MAC address learning control which based on ports |
|
VLAN features |
Supports IEEE 802.1Q |
|
Supports 4K active VLANs. |
|
Supports Port-based VLAN assignment. |
|
MAC address-based assignment |
|
Port-based QinQ |
|
QoS |
Supports Port-based rate limiting and flow-based rate limiting |
|
Supports 4 or 8 queues of different priorities on each port |
|
Supports mapping Mapping between 802.1p priorities and queues |
|
Supports SP, WRR, and SP+WRR algorithms. |
|
IPv6 features |
Supports IPv6 protocol. |
|
Supports MLD v1/v2 snooping. |
|
Supports Static IPv6 routes. |
|
Multicast |
Supports MVLAN |
|
Supports IGMP v1/v2/v3 snooping |
|
Supports Port-based rate limiting for multicast packets |
|
Supports Controllable multicast |
|
Reliability |
Supports STP (IEEE 802.1d), RSTP (IEEE 802.1w), MSTP (IEEE 802.1s), and RRPP topology and RRPP multiinstance |
|
Security & access features
|
802.1x authentication and limit on the number of users on an interface |
|
Storm suppression |
|
IP Source Guard |
|
Supports multiple authentication methods including AAA,authentication, RADIUS authentication, and TACACS+ authentication |
|
802.1x authentication, MAC address authentication, MAC bypass authentication |
|
Supports DHCP snooping |
|
Supports Port isolation and sticky MAC. |
|
Supports Packet filtering based on MAC addresses |
|
Supports suppression of multicast, broadcast, and unknown unicast packets |
|
Supports Limit on the number of learned MAC addresses CPU defense |
|
Supports DHCP relay |
|
Surge protection |
Surge protection capability of service ports: 6 kV (The surge protection capability of service ports on PoE switches is 1 kV.) |
|
Management and maintenance |
Supports automatic configuration. |
|
Supports CLI configuration. |
|
Supports remote configuration and maintenance by using Telnet. |
|
Supports SNMP v1/v2/v3. |
|
Supports SSHv2. |
|
Supports Web management. |
|
Operating environment |
Long-term operating temperature: –5oC to + 50oC
Relative humidity: 10% to 90% (non-condensing) |
|
Power supply |
AC:
Rated voltage: 100 V to 240 V, 50/60 Hz
Maximum voltage: 90 V to 264 V, 50/60 Hz |
|
Dimensions (mm) |
442×220×43.6 |
|
Weight |
< 2.4 kg |
|
Power consumption |
< 15.5 W |
