Item |
Description |
Fixed port |
24 Ethernet 10/100 ports, 2 Gig SFP and 2 dual-purpose 10/100/1000 or SFP |
Forwarding performance |
9.6 Mpps |
MAC address table |
Supports 16K MAC address entries. |
Supports manual deletion of dynamic MAC address entries |
Supports aging time of MAC address configurable |
Supports MAC address learning learning control which based on ports |
Supports blackhole MAC address entries. |
VLAN features |
Supports IEEE 802.1Q |
Supports 4K VLANs. |
Supports Port-based VLAN assignment. |
MAC address-based assignment |
Port-based QinQ |
QoS |
Supports Port-based rate limiting and flow-based rate limiting. |
Supports 8 queues of different priorities on each port. |
Supports mapping between 802.1p priorities and queues. |
Supports packet-based priority remark and packet redirection.
|
Supports SP, WRR, and SP+WRR algorithms. |
IPv6 features |
Supports IPv6 protocol. |
Supports MLD v1/v2 snooping. |
Supports Static IPv6 routes. |
Multicast |
Supports MVLAN |
Supports IGMP v1/v2/v3 snooping |
Supports Port-based rate limiting for multicast packets |
Supports Controllable multicast |
Reliability |
Supports STP (IEEE 802.1d), RSTP (IEEE 802.1w), MSTP (IEEE 802.1s), and RRPP topology and RRPP multiinstance
Supports SEP and ERPS (G.8032)
Supports smart Link tree topology and smart Link multi-instance, implementing millisecond-level protective switchover.
|
Security & access features
|
802.1x authentication and limit on the number of users on an interface
|
Storm suppression |
IP Source Guard |
Supports multiple authentication methods including AAA,authentication, RADIUS authentication, and TACACS+ authentication |
802.1x authentication, MAC address authentication, MAC bypass authentication
|
Supports DHCP snooping |
Supports Port isolation and sticky MAC. |
Supports Packet filtering based on MAC addresses |
Supports suppression of multicast, broadcast, and unknown unicast packets
|
Supports Limit on the number of learned MAC addresses CPU defense |
Supports DHCP relay |
Surge protection |
Surge protection capability of service ports: 6 kV.
|
Management and maintenance |
Supports Web-based device management. |
Supports SNMP V1/V2/V3SSHv2. |
Supports Remote configuration using Telnet |
Supports SNMP v1/v2/v3. |
Supports SSHv2. |
Operating environment |
Long-term operating temperature: –5oC to + 50oC
Relative humidity: 10% to 90% (non-condensing)
|
Power supply |
AC:
Rated voltage: 100 V to 240 V, 50/60 Hz
Maximum voltage: 90 V to 264 V, 50/60 Hz |
Dimensions (mm) |
442×310×43.6 |
Weight |
< 4.5 kg |
Power consumption |
< 147W |