Item |
Description |
Fixed port |
48*10/100Base-TX ports, 2*100/1000Base-X SFP ports, 2*1000Base-X SFP ports |
Forwarding performance |
13.2 Mpps |
MAC address table |
Supports IEEE 802.1d compliance. |
Supports 16K MAC address entries. |
Supports MAC address learning and aging. |
Supports Static, dynamic, and blackhole MAC address entries. |
Packet filtering based on source MAC addresses |
VLAN features |
Supports 4K VLANs |
Supports Guest VLANs, voice VLAN, and super VLAN |
Supports VLAN assignment based on MAC addresses, protocols, and IP subnets |
Supports QinQ |
Supports Selective QinQ |
Supports 1:1 VLAN mapping |
Supports N:1 VLAN mapping |
Reliability |
Supports RRPP (ring topology, intersecting rings, and multi-instance), implementing protection switchover within 50 ms |
Supports Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover |
Supports STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s)
Supports BPDU protection, root protection and loop protection |
Supports Smart Ethernet Protection (SEP) |
IP routing |
Supports Static routing, RIPv1, RIPv2, and ECMP |
IPv6 features |
Supports Neighbor Discovery (ND) |
Supports Path MTU (PMTU) |
Supports IPv6 ping, IPv6 tracert, and IPv6 Telnet |
Supports Manually configured tunnel |
Supports 6 to 4 tunnel |
Supports ISATAP tunnel |
Supports ACLs based on the source IPv6 address, destination IPv6 address, Layer 4
ports, or protocol type |
Supports MLD v1/v2 snooping |
Multicast |
Supports 1 K multicast groups |
Supports IGMP v1/v2/v3 snooping and IGMP fast leave |
Supports Multicast VLAN and multicast replication between VLANs |
Supports Multicast load balancing among member ports of a trunk |
Supports Controllable multicast |
Supports Port-based multicast traffic statistics |
QoS/ACL |
Supports Rate limiting on packets sent and received by an interface |
Supports Packet redirection |
Supports Port-based traffic policing and two-rate three-color CAR |
Supports Eight queues on each port |
Supports WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms |
Supports Re-marking of the 802.1p priority and DSCP priority |
Supports Packet filtering on Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination |
Supports IP address, port number, protocol type, and VLAN ID |
Supports Rate limiting in each queue and traffic shaping on ports |
Security & access |
Supports User privilege management and password protection |
Supports DoS attack defense, ARP attack defense, and ICMP attack defense |
Supports Binding of the IP address, MAC address, interface, and VLAN |
Supports Port isolation, port security, and sticky MAC |
Supports Blackhole MAC address entries |
Supports Limit on the number of learned MAC addresses |
Supports 802.1x authentication and limit on the number of users on an interface |
Supports AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC |
Supports SSH v2.0 and CPU defense |
Supports Blacklist and whitelist |
Supports DHCP Server, DHCP Relay, DHCP Snooping, DHCP Security |
Surge protection |
6KV surge protection capability on service ports (1KV on service ports on PoE devices) |
Management and maintenance |
Supports iStack and MAC Forced Forwarding (MFF) |
Supports Remote configuration and maintenance using Telnet |
Supports Auto-Config.and Virtual cable test |
Supports Ethernet OAM (IEEE 802.3ah and 802.1ag) |
Supports SNMP v1/v2c/v3 and RMON |
Supports MUX VLAN,GVRP and Web NMS |
Interoperability |
Supports VBST (Compatible with PVST/PVST+/RPVST) |
Supports LNP (Similar to DTP) |
Supports VCMP (Similar to VTP) |
Operating environment |
Operating temperature: 0°C to 50°C(long term);
Relative humidity: 10%–90% (non-condensing) |
Power supply |
AC:
Rated voltage range: 100 V to 240 V AC; 50/60 Hz
Maximum voltage range: 90 V to 264 V AC; 50/60 Hz |
Dimensions (mm) |
442 (W) x 420 (D)x 43.6 (H) |
Weight |
< 4.3Kg |
Power consumption |
< 880W(PoE: 740W)
|