Huawei Switch
> S1700 Series
> S2700 series
> S3700 Series
> S7700 Series
>S5700 Series
> S6700 Series
> S9700
> Core data switch
Home > Products > Switch > Huawei Switch > S5700 Series >
Huawei Switch
S5720-36C-PWR-EI-AC
S5720-36C-PWR-EI-AC S5720-36C-PWR-EI-AC S5720-36C-PWR-EI-AC

S5720-36C-PWR-EI-AC

Item No.:
Huawei S5720-36C-PWR-EI-AC switch with 28-ports 1000BASE-T, 4-ports GE combo, 4-ports 10G SFP+, 2 power slots, 1 AC power module equipped, 1 extension slot
INQUIRY
  • Description
  • Specification parameter
  • Networking Scheme

  • Overview

     

    Huawei S5720-36C-PWR-EI-AC switch with 28-ports 1000BASE-T , 4-ports GE combo, 4-ports 10G SFP+

    With 2 power slots, 1 AC power module included

    With 1 extension slots

    Forwarding perfomance: 132 Mpps

    Switching capacity: 598Gbps

    64K MAC address entries

    POE switch

     

    Huawei Quidway S5720-EI series enhanced gigabit Ethernet switches (S5720-EI for short) are next-generation switches that provide flexible GE access ports and 10GE uplink ports. S5720-EI provides large table sizes and higher hardware processing capabilities than similar switches. It supports IPv6, intelligent stack (iStack), flexible Ethernet networking. S5720-EI is widely for aggregation/access in enterprise campus networks or gigabit access in data center networks.

     

     

    Tech Specs

    Item Description
    Fixed port 28*10/100/1000Base-T Ethernet ports, 4*combo 100/1000Base-X SFP ports, 4*10G
    SFP+ ports
    Forwarding performance 132 Mpps
    Extended slot One extended slot that supports an uplink interface card or private stack card
    DRAM and Flash SDRAM: 2 GB; Flash: 340 MB

    MAC address table

    		 IEEE 802.1d
    64K MAC address entries
    MAC address learning and aging
    Static, dynamic, and blackhole MAC address entries
    Packet filtering based on source MAC addresses
    VLAN 4K VLANs
    Guest VLAN and voice VLAN
    GVRP
    MUX VLAN
    VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
    1:1 and N:1 VLAN mapping
    VLAN-based transparent transmission of protocol packets
    Jumbo frame 12K

    Ring protection

    		 RRPP ring topology and RRPP multi-instance
    Smart Link tree topology and Smart Link multi-instance, providing millisecond-level
    protection switchover
    Smart Ethernet Protection (SEP),G.8032 Ethernet Ring Protection Switching (ERPS)
    STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)
    BPDU protection, root protection, and loop protection; BPDU tunnel
    IP routing Static routing, RIPv1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, and policy-based routing
    16K IPv4 unicast routes, 8K IPv6 unicast routes
    3K IPv4 static routes, 1K IPv6 static routes
    IPv6 features Neighbor Discovery (ND)
    Path maximum transmission unit (PMTU)
    IPv6 Ping, IPv6 Tracert, and IPv6 Telnet
    6 to4 tunnel, ISATAP tunnel, and manually configured tunnel
    ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or
    protocol types
    Multicast Listener Discovery (MLD) v1/v2 snooping
    Multicast forwarding IGMP v1/v2/v3 snooping and IGMP fast leave
    Multicast forwarding in a VLAN and multicast replication between VLANs
    Multicast load splitting among trunk member ports
    Controllable multicast
    Layer 2 multicast control
    Port-based multicast traffic statistics collection
    IGMPv1/v2/v3, Protocol Independent Multicast Sparse Mode (PIM-SM), and Protocol Independent
    Multicast Dense Mode (PIM-DM), and Protocol Independent Multicast Source-Specific Multicast (PIM-SSM)
    Multicast Source Discovery Protocol (MSDP)
    QoS/ACL Inbound and outbound traffic rate limiting on a port
    Packet redirection
    Broadcast storm control
    Port-based traffic policing and two-rate and three-color CAR
    Eight queues per port,Weighted round robin (WRR), deficit round robin (DRR), strict priority (SP), WRR+SP, and DRR+SP queue scheduling algorithms
    Weighted random early detection (WRED)
    Re-marking of the 802.1p priority and DSCP value of packets
    Packet filtering based on Layer 2 to Layer 4 information, including source MAC addresses, destination MAC addresses, source IP addresses, destination IP addresses, TCP/UCD source/destination ports, protocol types, and VLAN IDs
    Per queue rate limiting and interface traffic shaping
    1:1,N:1,N:4 port mirroring; VLAN mirroring
    Security
    features    		 Hierarchical user management and password protection
    DoS attack defense, ARP attack defense, and ICMP attack defense
    Binding of the IP address, MAC address, interface number, and VLAN ID of a user
    Port isolation, port security, and sticky MAC
    MAC Forced Forwarding (MFF)
    Blackhole MAC address entries
    Limit on the number of learned MAC addresses
    IEEE 802.1x authentication and the limit on the number of users on an interface
    AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0
    Hypertext Transfer Protocol Secure (HTTPS)
    CPU defense; Blacklist and whitelist; MACSec ready
    Access security DHCP Relay, DHCP Server, DHCP Snooping, DHCP Client, DHCP Security

    Port aggregation

    		 LACP
    Up to 128 trunk groups
    Up to 8 member interfaces in each trunk group
    Reliability Ethernet OAM (IEEE 802.3ah and 802.1ag)
    ITU-Y.1731; BFD for BGP/IS-IS/OSPF/static route
    Super Virtual Fabric (SVF) Working as an SVF client that is plug-and-play with zero configuration
    Automatically loading the system software package and patches of clients
    One-click and automatic delivery of service configurations
    Supports independent running client
    Management
    and
    Maintenance    		 iStack, Virtual cable test, SNMP v1/v2c/v3, RMON/RMON2
    Web-based network management system
    System logs and multi-level alarms
    sFlow, LLDP/LLDP-MED, 802.3az EEE
    SCP (Secure Copy Protocol), TFTP, FTP
    Store dual software images and configuration files
    Interoperability VLAN-based Spanning Tree (working with PVST/PVST+/RPVST)
    Link-type Negotiation Protocol (LNP), similar to the Dynamic Trunking Protocol (DTP)
    VLAN Central Management Protocol (VCMP), similar to the VLAN Trunk Protocol (VTP)
    Operating environment Operating temperature:
    0-1800 m altitude: 0-45℃
    1800-5000m altitude: The operating temperature reduces by 1℃ every time the
    altitude increases by 220m.
    Relative humidity: 5% to 95% (noncondensing)
    Input voltage AC:
    Rated voltage range: 100 V to 240 V A C, 50/60 Hz
    Maximum voltage range: 90 to 264 V AC, 47/63 Hz
    No front power input
    Dimensions (mm) 442 (W) x 420 (D)x 43.6 (H)
    Typical power
    consumption

    without PD: 48.5W; with PD: <864.3W

     

Product order
Contact Us
Contact MAP Sales

ShenZhen OPTICOMM Technology CO.,LTD

Tel:  +86-0755 2100 4659

Fax: +86-0755 2100 4659

Mail: opticomms@opticomms.com