Specification |
Fixed port |
24x10GE SFP+, 2x40GE QSFP+ ports
|
Forwarding performance |
720 Mpps |
Extended slot |
Provide one extended slot. |
MAC address table |
288K MAC address entries |
MAC address learning and aging |
Static, dynamic, and blackhole MAC address entries |
Packet filtering based on source MAC addresses |
VLAN |
4K VLANs |
Guest VLAN and voice VLAN |
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports |
1:1 and N:1 VLAN Mapping |
QinQ and selective QinQ |
Reliability |
STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s) |
BPDU protection, root protection, and loop protection |
RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover
|
SEP, E-Trunk |
ERPS(G.8032 v2) |
BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM |
IPv4 routing |
Static routing, RIPv1, RIPv2, ECMP, and URPF |
OSPF, IS-IS, and BGP |
VRRP |
Policy-based routing |
Routing policy |
IPv6 routing |
Static route |
RIPng |
OSPFv3 |
BGP4+ |
ISISv6 |
IPv6 features |
Neighbor Discovery (ND) |
Path MTU (PMTU) |
IPv6 ping, IPv6 tracert, and IPv6 Telnet |
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type |
MLD v1/v2 snooping |
6to4 tunnel, ISATAP tunnel, and manually configured tunnel |
Multicast |
Static Layer 2 multicast MAC address |
MAC-based multicast forwarding |
IGMP snooping and IGMP fast leave |
Multicast VLAN |
MLD snooping |
IGMP proxy |
Controllable multicast |
Port-based multicast traffic statistics |
IGMP v1/v2/v3 |
PIM-SM, PIM-DM, and PIM-SSM |
MSDP |
QoS/ACL |
Rate limiting on packets sent and received by an interface |
Packet redirection |
Port-based traffic policing and two-rate three-color CAR |
Eight queues on each port |
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms |
Re-marking of the 802.1p priority and DSCP priority |
Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol type, and VLAN ID |
Rate limiting in each queue and traffic shaping on ports |
Security |
User privilege management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense |
Binding of the IP address, MAC address, interface, and VLAN |
Port isolation, port security, and sticky MAC |
Blackhole MAC address entries |
Limit on the number of learned MAC addresses |
802.1x authentication and limit on the number of users on an interface |
AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC |
SSH v2.0 |
Hypertext Transfer Protocol Secure (HTTPS) |
CPU defense |
Blacklist and whitelist |
Super Virtual Fabric (SVF)
|
Working as the parent node to vertically virtualize downlink switches as one device for management,
supports two-layer clients architecture
Support as a client node to be managed by SVF parent
|
Management and maintenance |
MAC Forced Forwarding (MFF), iStack (using service ports as stack ports) |
Virtual cable test, |
SNMP v1/v2c/v3, |
RMON, Remote configuration and maintenance using Telnet |
Web-based NMS |
System logs and alarms of different levels |
GVRP |
MUX VLAN |
Local port mirroring and remote switched port analyzer (RSPAN), allowing an observing port to forward packets |
Ethernet OAM (IEEE 802.3ah and 802.1ag) |
Interoperability |
Supports VBST (Compatible with PVST/PVST+/RPVST) |
Supports LNP (Similar to DTP) |
Supports VCMP (Similar to VTP) |
Input DC voltage: Rated input voltage range |
-48 V DC to -60 V DC |
Input DC voltage: Maximum voltage range |
-36 V DC to -72 V DC |
Operating temperature |
Operating temperature: 0-1800 m, 0-45℃; 1800-5000 m, decrease 1℃ when the altitude increases every 220 m
|
Relative humidity |
5% to 95% (non-condensing) |
Dimensions (W x D x H) |
442mm×420mm×44.4mm |
Power consumption |
without subcard:141W
with subcard:160W
|