Specification |
Fixed port |
24×100M/1G/2.5G/ 5G /10GBase-TEthernet ports, 4×10GE SFP+
|
Forwarding performance |
240 Mpps |
Extended slot |
One extended slot |
MAC address table |
32K |
MAC address learning and aging |
Static, dynamic, and blackhole MAC address entries |
Packet filtering based on source MAC addresses |
VLAN features |
4K VLANs |
Guest VLAN and voice VLAN |
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports |
VLAN Mapping, Super VLAN |
Basic QinQ and selective QinQ |
IPv4 routing |
Static routing, RIPv1, RIPv2, ECMP, URPF, OSPF, IS-IS, and BGP |
VRRP |
Policy-based routing |
Routing policies |
IPv6 routing |
Static routing |
RIPng |
OSPFv3, BGP4+, ISISv6 |
IPv6 features |
Neighbor Discovery (ND) and ND snooping |
IPv6 Ping |
VRRP6 |
DHCPv6 snooping, DHCPv6 server, and DHCPv6 relay |
MLDv1 and MLDv2 |
PIM-DM for IPv6, PIM-SM for IPv6 |
6 Over 4 tunnels |
Multicast |
IGMPv1/v2/v3 snooping |
Fast leave |
IGMP snooping proxy |
MLD snooping |
Port-based multicast traffic suppression |
Inter-VLAN multicast replication |
Controllable multicast |
IGMP v1/v2/v3 |
PIM-SM and PIM-DM |
Multicast Source Discovery Protocol (MSDP) |
Multicast routing policies |
QoS/ACL |
Traffic classification based on ACLs |
Traffic classification based on outer 802.1p fields, inner VLAN IDs, outer VLAN IDs, source
MAC addresses, and Ethernet types
|
Access control after traffic classification |
Traffic policing based on traffic classifiers |
Re-marking based on traffic classifiers |
Class-based packet queuing |
Associating traffic classifiers with traffic behaviors |
Rate limiting on inbound and outbound ports |
Traffic shaping based on ports and queues |
Tail drop |
Priority Queuing (PQ) |
Deficit Round Robin (DRR) |
PQ + DRR scheduling |
Weighted Round Robin (WRR) |
PQ + WRR scheduling |
Reliability |
STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) |
BPDU protection, root protection, and loop protection |
RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing millisecond-level
protection switchover |
Smart Ethernet Protection (SEP) |
G.8032 Ethernet Ring Protection Switching (ERPS) |
BFD for OSPF, IS-IS, VRRP, and PIM protocols |
Enhanced trunk (E-trunk) |
Security features
|
Defense against DoS, ARP, and ICMP attacks |
Binding of the IP address, MAC address, port number, and VLAN ID of a user |
Port isolation, port security, and sticky MAC |
MAC-Forced Forwarding (MACFF) |
Limit on the number of learned MAC addresses |
IEEE 802.1X authentication, MAC address authentication, Portal authentication, and hybrid
authenticatio
|
Authentication methods, including AAA, RADIUS, and HWTACACS |
CPU defense |
Super Virtual Fabric (SVF) |
SVF Parent and Client |
Management and
maintenance |
iStack (using service ports as stack ports) |
Virtual Cable Test (VCT) |
Ethernet OAM (IEEE 802.3ah and IEEE 802.1ag) |
SNMPv1/v2/v3 |
RMON |
Web-based network management system and relevant features |
System logs and multi-level alarms |
GVRP |
MUX VLAN |
sFlow |
Hypertext Transfer Protocol Secure (HTTPS) |
SSH1.5/SSH2 |
Operating environment |
Working temperature: 0–1800 m, 0–45°C; 1800–5000 m, the highest operating temperature
reduces by 1°C every time the altitude increases by 220 m.
Relative humidity: 5%–95% (noncondensing
|
Input AC voltage |
AC:
Rated voltage range: 100 V to 240 V A C, 50/60 Hz
Maximum voltage range: 90 V to 264 V A C, 47/63Hz
|
Dimensions |
442 (W)×420 (W)×44.4 (H) |
Typical power consumption |
580W without card and PD:121.6W
1150W AC without card and PD:106.9W
|