ONU

OPT-E01T

Item No.: 1GE+1CATV EPON ONU

1GE +1CATV(RF) EPON ONU

INQUIRY

Description
Specification parameter
Networking Scheme

OPT-E01T ONU is an EPON broadband terminal device designed for fulfilling FTTx and triple play service demand of cable television operators. This box is basing on the stable and mature Gigabit EPON technology, which has high performance/price ratio, and the technology of Layer 2/3 Ethernet switch, and CATV . It is highly reliable and easy to maintain, with guaranteed QoS for different service. And it is fully compliant to technical regulations such as IEEE802.3ah and technical requirement of EPON Equipment (V3.0) from China Telecom.

Feature:
♦ Plug and play, features auto-detecting, auto-configuration, and auto firmware upgrade, etc.
♦ Integrated OAM remote configuration and maintenance function.
♦   Support rich QinQ VLAN functions and IGMP Snooping multicast features.
♦ Integrated line testing compliant with GR-909.
♦ Support EPON fiber transceiver,CATV Rx and RF output diagnostic monitoring, EPON fiber transmitter and RF receiver disable remotely, etc.
♦ Fully compatibility with OLT based on Broadcom/PMC/Cortina chipset
♦    Full speed non-blocking switching.
♦   1K MAC address table
♦    64 full range VLAN ID.
♦    Support QinQ VLAN, 1:1 VLAN, VLAN reusing, VLAN trunk, etc.
♦ Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc.
♦    Support auto polarity detection of Ethernet ports (AUTO MDIX).
♦    Integrated IEEE802.1p QoS with four level priority queues
♦ Support IPv4 IGMP snooping and IPv6 MLD snooping.

Applications:
♦    Data services
♦ Voice services
♦    Video services
♦    Monitoring service
♦    FTTH / FTTB / FTTO / FTTP

Item	Parameter	specification
Optical interface specification	Transmission rate	PON :Downstream：1.25 Gbps Upstream：1.25 Gbps
Optical specifications	Downstream PON :Wavelength：1490nm CATV:Wavelength:1550nm Minimum receiver sensitivity：-27dBm Receive saturation power：-3dBm Upstream PON:Wavelength：1310nm Minimum output optical power：0dBm
Number of users can be connected	Up to 32 users within 20km.
opticres connector	Optical interface :SC/APC
Optical physical conditions	IEEE802.3-2005 1000 BASE-PX20+
Optical fiber	G.652 single-mode fiber
Ethernet interface specification	standard	IEEE802.3 IEEE802.3u IEEE802.3x
Port number	1GE— ONU Port
Connector type	RJ-45
LAN	IEEE 802.3 10/1000BASE-T, Automated negotiation Full duplex/Half duplex Support RJ-45 MDI/MDIX
VLAN	IEEE802.1q
Support the connection distance	Up to 100 meters
WLAN specification	WLAN	Compliant with IEEE802.11b/g/n
CATV	CATV	CATV radio frequency feature (optional) Output level 85dBuv (input-6dbm) AGC working range 10dB CNR ≥46dB@-6dBm (input)
EMC and safety	EMC	EN55022 B(CISPR 22B)
ESD defend and preserve	IEC 61000-4-2 GR-1089-CORE
Laser eye safety	l FDA 21CFR 1040.10 和 1040.11 l EN(IEC) 60825-1 l EN(IEC) 60825-2
Environment-protection standard	RoHS
Environmental requirements	Running temperature	-10ºC~55ºC
Storage temperature	-30ºC~60ºC
Operating humidity	10%~90% ,on-condensing
Storage humidity	5%~95% ,Non-condensing
Power	Power Supply	DC12V/1A
Power consumption	Max 10W
Physical specifications	Size	140mm30mm90mm（WHD）
Weight	<600g

Product order

Product Name: *

Email: *

Country: *

Phone: *

Subject: *

Message: *

OPT-E01T

Products

Case

Service

News

About Us

Contact Us