Product name | Product description |
OPT-G6P4 |
4*GPON port, 4*GE Combo port, 2*10GE SFP+ port, Double AC, Double DC or DC+AC power supply |
Attributes | OPT-G6P4 |
Switching Capacity | 68 Gbps |
Forwarding Rate | 101 Mpps |
Ports | 4*PON port, 4*GE Combo ports, 2*10GE SFP+, 2* Alarm port |
Power Redundancy | Dual hot-pluggable power supply. Can be double AC, double DC or AC+DC |
Power Supply |
AC: Input 90~240V, 47~63Hz; DC: Input -36V~-72V; |
Max Power Consumption | 65 W |
Outline Dimensions (mm) (W*H*D) |
437mm×44mm×280mm |
Weight (in maximum configuration) | ≤3KG |
Heat Dissipation | 25W |
Air flow | Left to Right |
Environmental Requirements |
Working temperature(Long term): -40°C~65 °C Storage temperature: - 40°C~70°C Relative humidity: 5%~90%, no condensing |
Attributes | OPT-G6P4 | |
PON Features | GPON |
Satisfy ITU -T standard - GPON: ITU-T G.984.1 - - - Gigabit-capable Passive Optical Networks (GPON) (Including all Amendments) - GPON: ITU-T G.984.2 - - - GPON: Physical Media Dependent (PMD) layer specification (Including all Amendments) - GPON: ITU-T G.984.3 - - - GPON: Transmission convergence layer specification (Including all Amendments) - GPON: ITU-T G.984.4 & G.988- - - GPON: ONT management and control interface (OMCI) specification (Including all Amendments) -TR-156 (G-PON access), TR-167 (G-PON aggregation) TR-101 compliant solution for FTTx OLT applications High splitter rate, each PON port supports 128*ONU, 8192*T-CONT Maximum transmission distance of 20KM DS/US transmission rate = 2.5 Gbps/1.25 Gbps Support uplink FEC, downlink FEC(Forward Error Correction) ONU identifier authentication: SN /SN+PASSWD Bandwidth allocation mechanism 5 types of T-CONT bandwidth Static Bandwidth Allocation Dynamic Bandwidth Allocation GPON feature parameter 4096 port-IDs per GPON MAC (Downstream and Upstream) 1024 Alloc -IDs per GPON MAC (Upstream ) |
L2 Features | MAC |
MAC Black Hole Port MAC Limit |
VLAN |
4K VLAN entries Port-based/MAC-based/IP subnet-based VLAN Port-based QinQ and Selective QinQ (StackVLAN) - IEEE 802.1q VLAN Tagging - IEEE 802.1ad provider bridge (QinQ) VLAN Swap and VLAN Remark and VLAN Translate GVRP Based on ONU service flow VLAN add, delete, replace |
|
Spanning Tree Protocol |
IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol instances (MSTP) |
|
Port |
Bi-directional bandwidth control Static link aggregation and LACP(Link Aggregation Control Protocol) Port mirroring and traffic mirroring |
|
Security Features | User Security |
Support ARP Attack Protection - Anti-ARP-spoofing - Anti-ARP-flooding Support MAC and IP Spoofing Protection Support Broadcast/Multicast Rate Limit IP Source Guard create IP+VLAN+MAC+Port binding Port Isolation MAC address binds to port and port MAC address filtration IEEE 802.1x and AAA/Radius authentication TACACS+ authentication DHCP anti-attack flood attack automatic suppression - Support DHCP filtering - Support DHCP Relay (Max Relay Connections) - Support DCHP Snooping with IP-MAC mapping to protect unauthorized fixed IP ONU isolation control |
Device Security |
Anti-DOS attack(such as ARP, SYN flood, Smurf, ICMP attack), ARP detection, worm and Msblaster worm attack SSHv2 Secure Shell SNMP v3 encrypted management Security IP login through Telnet Hierarchical management and password protection of users |
|
Network Security |
User-based MAC and ARP traffic examination Restrict ARP traffic of each user and force-out user with abnormal ARP traffic Dynamic ARP table-based binding Supports IP+VLAN+MAC+Port binding L2 to L7 ACL flow filtration mechanism on the 80 bytes of the head of user-defined packet Port-based broadcast/multicast suppression and auto-shutdown risk port URPF to prevent IP address counterfeit and attack DHCP Option82 and PPPoE+ upload user’s physical location Plaintext authentication of OSPF, RIPv2 and MD5 cryptograph authentication |
|
IP Routing | IPv4 |
ARP Proxy DHCP Relay DHCP Server Static route |
IPv6 |
- RFC 2375 IPv6 Multicast Address Assignments - RFC 2460 IPv6 Specification - RFC 2461 Neighbor Discovery for IPv6 - RFC 2463 ICMPv6 - RFC 2452 Transmission of IPv6 packet over Ethernet - RFC 3587 IPv6 Global Unicast Address Format - RFC 4007 IPv6 Scoped Address Architecture - RFC 4291 IPv6 Addressing Architecture - RFC 5072 IP Version 6 Over PPP - Support IPv6 static address ICMPv6 ICMPv6 redirection DHCPv6 ACLv6 Configured Tunnel 6 to 4 tunnel IPv6 and IPv4 Tunnels |
|
Service Features | ACL |
Standard and extended ACL Time Range ACL Packet filter providing filtering based on source/destination MAC address, source/destination IP address, port, protocol, VLAN, VLAN range, MAC address range, or invalid frame. System supports concurrent identification at most 50 service traffic Support packet filtration of L2~L7 even deep to 80 bytes of IP packet head |
QoS |
Rate-limit to packet sending/receiving speed of port or self-defined flow and provide general flow monitor and two-speed tri-color monitor of self- defined flow Priority remark to port or self-defined flow and provide 802.1P, DSCP priority and Remark CAR(Committed Access Rate), Traffic Shaping and flow statistics Packet mirror and redirection of interface and self-defined flow Super queue scheduler based on port and self-defined flow. Each port/ flow supports 8 priority queues and scheduler of SP, WRR and SP+WRR Congestion avoid mechanism, including Tail-Drop and WRED Support the rate limitation on the basis of each ONU uplink and downlink Support the flow classification of DBA and SLA Support flow-based tag priority and message redirection |
|
Multicast |
- RFC 2236 Internet Group Management Protocol (Snooping) - RFC 2362 Protocol Independent Mulitcast-Sparse Mode (PIM-SM) - RFC 3376 Internet Group Management Protocol version 3 (Snooping) IGMP Filter- IP Multicast filtering MVR and cross VLAN multicast copy IGMP Fast leave IGMP Proxy PIM-SM/PIM-DM/PIM-SSM PIM-SMv6, PIM-DMv6, PIM-SSMv6 MLDv2/MLDv2 Snooping |
|
MPLS | MPLS LDP | |
Reliability | Loop Protection |
ERRP (recover-time <50ms) Loopback-detection |
Link Protection |
FlexLink (recover-time <50ms) RSTP/MSTP (recover-time <1s) LACP (recover-time <50ms) BFD |
|
Device Protection |
VRRP host backup Double fault-tolerant backup of host program and configuration files 1+1 power hot backup EN 300 386 V1.3.1:2001-09/EN 55022:1998, Class A EN 300 386 V1.3.1:2001-09/EN 61000-4-3:1998 EN 300 386 V1.3.1:2001-09/EN 6100-4-6:1996 EN 300 386 V1.3.1:2001-09/EN 61000-4-4:1995 EN 300 386 V1.3.1:2001-09/EN 61000-4-5:1995 EN 300 386 V1.3.1:2001-09/EN 61000-4-2:1999 |
|
Maintenance | Network Maintenance |
Telnet-based statistics RFC3176 sFlow LLDP 802.3ah Ethernet OAM - Support IEEE 802.1ag - Connectivity Fault Management - Support IEEE 802.3ah - Ethernet in First Mile - Support ITU-T SG 13, Y.1731 - Requirements for OAM in Ethernet Networks - Support RFC2544 Layer 2 and 3 testing up to line rate - Support ITU-T Y.1564 EtherSAM RFC 3164 BSD syslog Protocol Ping and Traceroute |
Device Management |
Command-line interface (CLI Console), Telnet and WEB configuration - Support CLI via console port - Support CLI via Multi-session Telnet - Support CLI via SSHv1,v2 System configuration with SNMPv1/v2/v3 RMON (Remote Monitoring)1/2/3/9 groups of MIB RFC 1305 - NTP(Network Time Protocol) RFC 2030 - SNTP TR069 |
ShenZhen OPTICOMM Technology CO.,LTD
Tel: +86-0755 2100 4659
Fax: +86-0755 2100 4659
Mail: opticomms@opticomms.com